Reduce the failure of the bending machine
- data:2022-11-22
- source:home station
- popularity:148
It is normal that the bending machine breaks down during operation, so how to effectively reduce the failure of the bending machine?
There are generally three methods to detect the faults of the rolling machine, one is the interface signal detection. That is to say, the principle of this detection method is to check by programming, such as some signal lights prompted by the control system and the mutual exchange lights. A simple analysis can detect the fault.
The second is equipment testing. In case of failure of the rolling machine, we can use the equipment detector randomly given by the purchased rolling machine. Its principle is mainly to detect whether each circuit of the rolling machine is normal, so as to find out the corresponding failure.
The third is empirical analysis. Employees who have operated the coiler for a long time will generally know where the failure occurred. This is a common method, but it is not the method recommended by us. Because the unprofessional nature of their employees will bring danger at any time, so if they really want to repair, they must get the agreement of the organization.
When the motor stops striking during work, it may be that the circuit is overloaded or the rolling machine rolls the boards that exceed the bearing capacity, which can be divided into overload and other situations.
Solution: readjust the load capacity of the circuit, and determine the bending objects of the bending machine based on the load capacity of the machine tool. If the load capacity is exceeded, the bending will not be carried out.
The fault feature is the heating of the main shaft of the plate bending machine, which is generally due to the correct installation of the parts of the plate bending machine, such as convenient position, wear of the journal and hole of the main shaft and other abnormal phenomena.
Previous:Precautions and steps for using the bending machine
Next:沒(méi)有了!
- 2024-05-30Signing Tour in Tanzania
- 2022-11-22Reduce the failure of the bending machine
- 2022-11-22Adjust the roll height of the plate bending machine
- 2022-11-22Maintenance Procedures for Hydraulic Plate Rolling Machine
- 2022-11-22Structure and precautions of four roll plate bending machine:
- 2022-11-22Classification of plate rolling machine
- 2022-11-22Precautions and steps for using the bending machine
- 2022-11-22Rolling machine is widely used
- 2022-11-22Key points for maintenance of plate rolling machine in winter
- 2022-11-22Common problems in the use of three roll plate bending machine
- 2022-11-22Precautions and steps for using the bending machine
- 2022-11-22Common problems of plate rolling machine
- Radial drilling machine
Radial drilling machine
- shaper machine
shaper machine
- Slotting machine
Slotting machine
- Turret milling machine
- Jiangsu Longsheng Machine Manufacturing Co.,LTD
- Hotline:0086-513-88281688
- Hotline:0086-15951415788
- Email:[email protected]
- Company address:Group 24, Hongqi Village, Libao Town, Haian, Nantong, Jiangsu, China